Huepar Self-leveling Professional Green Beam Cross Line Laser 360-Degree Coverage Horizontal and Vertical Line with Pulse Modes

Specifications:

Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW
Laser Wavelength: 510 nm
Leveling Accuracy: ±3mm/10m
Horizontal/Vertical Accuracy: ±3mm/10m
Leveling/Compensation Range: 4°±1°
Working Distance (Line): 45m(100 LUX),up to 60m with laser reveiver
Operating Time: 4~6 hours with all laser beams on

Spread Coverage:H360°/ V360°
Power Source: 4×˝AA˝ , >1500mA
IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough.
Operation Temperature Range: 14℉- 122℉(-10℃-＋50℃)
Storage Temperature Range: -4℉- 158℉(-20℃-＋70℃)

Size: 8.5x10 cm(3.4"x3.8")

Warning:
Avoid direct exposure of the laser beam to the eyes.

Items in the Package:

1 X Huepar 902CG laser level( No including battery )
1 X Magnetic pivoting base
1 X Green laser target card
1 X Cloth case
1 X English User's Manual

Features:

• 360-DEGREE VERTICAL and 360-DEGREE HORIZONTAL LINE - With its ultra bright 360-degree vertical and 360-degree horizontal green beams the 902CG Laser Level provides all-around leveling coverage with and accuracy of ±1/9 of an inch at 33 feet and a maximum working range of 150 feet, enabling you to work in different parts of a large room simultaneously

• MULTIFUNCTIONAL MODE - One button operation makes it easy to project lines together or independently (cross line, vertical and 360-degree horizontal). With our smart pendulum system, the pendulum locks when the level is switched off. Simply, hold the top button 2 seconds to start manual mode, letting you project lines in any position or angle.

• 2 SWITCHABLE FULL-TIME PULSE MODES - Default pulse mode is suitable for using indoor. For outdoor applications you can switch to a secondary mode which provides a darker laser beam allowing for better visibility in bright conditions.

• ROUBUST AND DURABLE DESIGN - The 902CG Laser Level is both waterproof and sturdy to ensure that you can rely on it in any working conditions. Being protected by TPR soft rubber, makes our laser level shock resistant, wear resistant and impact resistant. It comes with a magnetic L mount with tripod thread of 5/8-11-Inch and 1/4-20-Inc.

Two modes of use

➤Self-leveling mode:

Unlock the pendulum, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).

➤Manual mode:

Lock the pendulum, you can （use tripod or other bracket ）place the laser tool at various angles to project non-level straight laser lines. Slashes can be projected.The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

➤Three kinds of circuit switching functions:

Each time the power button is pressed once, the laser tool projects horizontal lines, vertical lines, and cross lines in sequence.

360° cover horizontal line and 360° vertical line (H360°/V360°)

➤ Pulse Mode：

●Unlock the pendulum, press and hold the power button (for about 5 seconds) to turn on the pulse mode, then turn it on red.

●When outdoor work is required (the receiver needs to be purchased separately,  the laser receiver LR510 can receive pulses.

●The receiver frequency is 10khz and the Huepar brand is the best pairing.

Various kinds of fixing method:

●Strong Magnetic L mount with triop thread can attaches the laser to any steels easily, turning around 180-degree as you like.

●It can also accepts a standard tripod screw to do height adjustment.

How to power ON:Short press the power key or slide locking switch to turn the laser tool ON.

How to switch the line :After power on, short press the power switch once a time,the laser tool will project horizontal line,vertical line and cross line in turn.

How to turn the pulse mode ON:After power on,long press the the power key,when the blue light is on,the pulse mode is on.

How to power OFF:Lock the pendulum before short pressing the power button to turn the laser tool OFF.